Before getting started with the HP DeskJet 2600 setup process, install the HP Deskjet 2600 Driver. In case you don’t have one, you can also download it from the official website of HP. Now, follow the steps mentioned here, which can help you complete the HP DeskJet 2600 setup. To begin with, ensure that you have put together the paper in the input tray. Then, install the ink cartridges before getting started with the wireless connection process. After this, remove all the packing outside the printer device and keep the printer device on a flat surface and connect one end of the power cord to the printer’s back end and other end to the power outlet and turn on your printer device. Now, open the paper input tray and place the load of 10 to 20 sheets of paper and adjust the paper width guide so that it gets adjusted with the paper. Next, gently remove the protective orange tape to get the HP DeskJet 2600 ink cartridge out of the package. Open the ink cartridge door and place the ink cartridge in the respective slots. Next, you need to place an alignment page at the right front corner of the scanner glass. Lastly, press the Start copy black button in order to align the cartridges.